On the RadioRemote One) None of the receivers are working. What should I do?
First, determine that the transmitter is displaying normal indications: When the BANK button is depressed, the BANK window should appear on the LCD, displaying the bank assignment number, and the LCD backlights should be illuminated when the button is released. If this does not happen, replace the batteries, and repeat the check. If the transmitter displays appear to be normal, check each of the channels you intend to use, and be sure they are turned ON. Check that the flash power bar graph on each active channel has at least one indicator bar darkened, and the bar graph follows any change in flash power as directed by the front panel FLASHPOWER buttons. The bar graph should respond to the FIRE button by scrolling all its segments down, and then back up twice. Turn all the unused channels OFF. Are the receivers turned on? Are the batteries inside still good? Make sure that the individual receivers are turned on, and set to the proper channels and to the proper bank. Remember, the screw
