On the Pro-Solo mkII, if the main cv/gate output is set to Hz/Volt will the Aux1 output also automatically be switched to Hz/Volt or will it only work via Volt/Octave?
Neither! – The Aux output on the Solo is not controllable by MIDI Notes so there is no “octave” for it to be related to. Generally the Pro-Solo Aux1 output is intended to be used with controllers (CCs) – the Aux output can be set with min and max values which automatically scale. The Pro-2000 mkII Auxes on the other hand CAN be set to MIDI notes, and when set to be controlled by MIDI Notes they are always volt/octave, but otherwise they are the same as for the Solo. Each main output A & B of the Pro-2000 mkII are independently assignable to Volt/Oct or Hz/V or 1.2V/Oct. Q: How do I sync the arpeggiator on my synth to MIDI clock using the Pro-Solo. A: Answers differ depending if you have Pro-Solo mk1 or mkII – For mk1 – The Pro-Solo will operate in either sync mode, or CV mode, but cannot perform both tasks simultaneously. This is because in sync mode, the CV, Gate and Aux sockets are used to output the required clock pulses. If you want to clock your synths arpeggiator, put the Solo in
Related Questions
- On the Pro-Solo mkII, if the main cv/gate output is set to Hz/Volt will the Aux1 output also automatically be switched to Hz/Volt or will it only work via Volt/Octave?
- Where would I connect the Midi to CV gate (or other trigger signal) so that it triggers the whole envelope?
- Can the Windsonic output 4 Hz or higher frequency?
