Occasionally, I see one or more O characters flash on my CDQPrima LCD display. What do these mean?
The ‘O’ stands for Overload. These indicators will flash when either the input audio to the encoder (to the left of the ‘NF’) or the received audio to the decoder (to the right of the ‘NF’) is overloaded. If these indicators are present, reduce the current audio input level. What does a ‘B’ on the top line of the LCD display indicate? The ‘B’ stands for Bit Errors, and it indicates errors in the transmission media. The ‘B’ may also be accompanied by alarm relay chatter and audio muting. My LCD display went blank, but the CDQPrima still works. What happened? Some models of the CDQPrima may reset to a blank display after a reset of factory defaults. Refer to the troubleshooting section of the CDQPrima Technical Reference Manual for resetting the display. Far-end remote control is a very powerful feature, but do I need a computer terminal to control the far-end CDQPrima? Yes. Far-end remote control works only with a terminal or PC connected to the local CDQPrima. Far-end remote control is
