No audio on the recorded file. Whats wrong?
This may be a result of choosing the wrong record audio source in the System Device in ComproPVR Settings. If you can view the TV picture but you get no audio, you should check the following: Check that the sound is not muted or low volume in the Windows Volume Control dialog. (Double-click on the speaker icon in the system tray.) Verify that the outer audio patch cable is connected between the Audio-Out of the device and Line In of your sound card and that you have selected the audio source to be “Line-In” in ComproPVR. Refer to the Hardware Installation chapter for more information. Make sure your sound card record settings in the control panel enables the “Line-In” and not muted or low volume. TV sound output is from the green Audio-Out port on VideoMate TV PCI Tuner card. You have to install the provided audio patch cable in order to record the sound. Make sure the speaker is connected to your own sound card instead of TV card. If above doesn’t help, please update product sofware a
