My shifter jams or hangs up in gear. What is the problem?
First, check to see if the linkage rods are encountering any interference. With the engine off and the parking brake engaged, have a friend operate the shifter and observe the linkage rods to see that the rods operate freely. Second, check to see if the transmission arms have become elongated (wallowed out). This may cause incomplete travel. Be sure that the linkage rods are parallel to the shifter lever’s travel. If they are “crooked” it may cause binding. Finally, the mechanism may be in need of a rebuild. Although made for years of outstanding performance, the shifter may require a rebuild after several years of use or severe duty. See the rebuild information below should you require this service.
