My servos work backwards on my new model. Whats wrong?
There are two possible answers to this question: 1. Moving control A activates the wrong servo. In this case, please unplug all servos from your receiver, check your model’s and radio’s instructions, and reinstall. Note that some manufacturers use different designations for which slot controls which channel so when in doubt follow your radio’s manual. 2. When you move control A the servo goes the wrong direction. For example, moving your rudder stick right causes the rudder to move left. This is an installation or set up problem with your model. If your radio has servo reversing switches or computer radio programming, reverse the direction of that servo. If it does not, you will need to purchase a reversed servo, a servo reversing lead, or change your linkage so the pushrod works from the opposite side of the arm so that the linkage operates properly.
