My PhoneTree® USB is not calling out and I can hear it dialing whats wrong with PhoneTree® ?
To check if your telephone lines are active there are a couple of items that should be reviewed on your computer. First, on the opening screen of PhoneTree® 2000 or PhoneTree® MVP USB, click on Configure at the top of your screen, then click on Phone Lines and view the Line Use Settings and make sure that they are correct. Lines that are setup correctly and functioning normally will also display a green dot on the upper left side of the phone line configure pop-up panel. If you do not have a green dot for each phone line, exit out of the PhoneTree® application and go to the Windows® Control Panel. Once you do this, click on the System icon, then click on Device Manager. When the Device Manager is displayed, click on the “plus box” to the left of “Universal Serial Bus Controllers.” Under “Universal Serial Bus Controller” each of your telephone lines should be listed along with devices/drivers installed. If no telephone lines are listed, disconnect the USB cable from the PhoneTree® USB u
