My NeXT laser printer fails to fully eject the sheet – how to fix?
printer, eject, NeXT laser NeXT laser, eject paper Fix it as follows. If you continually get messages like, “sorry, the printer is jammed” and you have to pull each page out the last inch, you probably need to replace the 14 tooth gear in the output stage(fuse ass’y). You can see this gear before you disassemble the printer, so that is a good first step. Then read these instructions all the way through and see if you want to attempt it. Next recommends replacing the entire fuse ass’y ( big bucks) if the gear is damaged, but Chenesko, Inc., of Ronkonkoma, NY sells the gears for $2.31. The part number is RS1-0132. They recommended I also replace the 20 tooth gear, number RS1-0116, but I don’t know if it is really necessary. Their phone number is 800-221-3516. PartsNow is also selling laserprint replacement parts. Their part number for the a replacement roller part is RA1-84489-000 000. You might contact them for further details.
printer, eject, NeXT laser NeXT laser, eject paper Fix it as follows. If you continually get messages like, “sorry, the printer is jammed” and you have to pull each page out the last inch, you probably need to replace the 14 tooth gear in the output stage(fuse ass’y). You can see this gear before you disassemble the printer, so that is a good first step. Then read these instructions all the way through and see if you want to attempt it. Next recommends replacing the entire fuse ass’y ( big bucks) if the gear is damaged, but Chenesko, Inc., of Ronkonkoma, NY sells the gears for $2.31. The part number is RS1-0132. They recommended I also replace the 20 tooth gear, number RS1-0116, but I don’t know if it is really necessary. Their phone number is 800-221-3516. PartsNow is also selling laserprint replacement parts. Their part number for the a replacement roller part is RA1-84489-000 000. You might contact them for further details. To examine your gear, open the rear (delivery ) door and un
printer, eject, NeXT laser NeXT laser, eject paper Fix it as follows. If you continually get messages like, “sorry, the printer is jammed” and you have to pull each page out the last inch, you probably need to replace the 14 tooth gear in the output stage(fuse ass’y). You can see this gear before you disassemble the printer, so that is a good first step. Then read these instructions all the way through and see if you want to attempt it. Next recommends replacing the entire fuse ass’y ( big bucks) if the gear is damaged, but Chenesko, Inc., of Ronkonkoma, NY sells the gears for $2.31. The part number is RS1-0132. They recommended I also replace the 20 tooth gear, number RS1-0116, but I don’t know if it is really necessary. Their phone number is 800-221-3516. PartsNow is also selling laserprint replacement parts. Their part number for the a replacement roller part is RA1-84489-000 000. You might contact them for further details. To examine your gear, open the rear (delivery ) door and un
