My Mini-Clik is connected to a Toro GreenKeeper controllers rain sensor inputs, and the system will not come on. What is wrong?
It is possible that the rain sensor is not wired properly for your controller. The Toro GreenKeeper requires a “normally open” sensor input. Since we send the Mini-Clik from the factory in “normally closed” configuration, it requires a slight wiring modification for the GreenKeeper. To check if this has been done, look at the wires coming out of the Mini-Clik and confirm that the center wire labeled “normally open” has been connected to the copper-colored extension wire. If this is not the case, ask your installer to check it out.
