My ClimaCushion is dirty, can I use water to clean it?
NO! ClimaCushion is an electrical device and should not be near water when being used. Please see cleaning instructions under “Maintenance and Cleaning.” 5. No air is coming from my CimaCushion. If you hear the fan running make sure the ClimaCushion is correctly located on the chair. Make sure the controller is located in the front right of the chair. Next, make sure the fan is not covered. It is located in the front middle of the Climacushion and draws air from the top of the cushion. If upside down or covered the fan cannot draw air and circulate it through the air port holes. 6. I turned on the heat but it is not getting warmer. The ClimaCushion uses a state-of-the-art Carbon Fiber heating pad that is regarded as safe and provides radiating heat. It will not heat immediately as old fashioned “wire element” heating systems. Place the power switch to the “II” setting and wait for 5 minutes (make sure the Warm light is on) and you should feel heat. If ClimaCushion is too hot switch to
