My broadband provider uses static IP addressing, not dynamic (DCHP) addressing. How do I configure my InnoMedia 3328-2 telephone adapter to work with my network?
Please follow the steps below if you need to assign a static IP address to your InnoMedia 3328-2 telephone adapter: 1) Connect your telephone adapter and telephone to your broadband network according to the instructions included with the adapter. 2) Pick up the telephone handset and dial ***1. You will hear an announcement which tells you the IP address currently associated with the telephone adapter. Write down the IP address and hang up the telephone handset. Note: Dialing ***1 will work even if you do not hear a dial tone. 3) Open a Web browser (Internet Explorer, for example) on a computer that is connected to the same network as the telephone adapter. 4) In the Web browser, type the IP address in the Address box and press the Enter key. A dialog box requesting a User ID and Password will be displayed. 5) Enter admin for the User ID and n2p for the Password and then press the Enter key. The InnoMedia MTA 3328-2 Web Management Tool home page will be displayed. 6) Click the Network C
Related Questions
- My broadband provider uses static IP addressing, not dynamic (DCHP) addressing. How do I configure my Hello VoIP 3328-2 telephone adapter to work with my network?
- My broadband provider uses static IP addressing, not dynamic (DCHP) addressing. How do I configure my InnoMedia 3328-2 telephone adapter to work with my network?
- My broadband provider uses static IP addressing, not dynamic (DCHP) addressing. How do I configure my telephone adapter to work with my network?
