Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Mixing Large Amounts Of Rubber Using A Mechanical Mixer?

April 26, 2017amounts large mechanical mixer mixing rubber

0

Posted

Mixing Large Amounts Of Rubber Using A Mechanical Mixer?

1 Answer

0

Posted

If using a drill with a “Squirrel Mixer” or other attachment to mix large amount of rubber, mix Parts A & B for 3 minutes at a low RPM. Take a mixing paddle and scrape the sides and bottom of your mixing container several times. Important material hides on the bottom and sides of your mixing container and failure to get this material into the mix will result in the rubber not properly curing. Empty the contents of your mixing container and use the drill to mix again for another 2 minutes. Use the paddle to again hand mix (scrape the sides and bottom of your mixing container several times) for 2 minutes and apply over your model. This technique is your best bet for successful mixing and protection your mold rubber investment.