Many SCCs have a capacity stated in a range. Should I use the equipments design capacity or my operating rate to select the proper SCC?
Use the design capacity and not the typical operating rate when selecting your SCC. I understand that I should only provide one material description per SCC. If I have a coating line that uses numerous water-based and solvent-based coatings, should I add the gallons of water-based and solvent-based paints together and report the sum for the material throughput and provide the weighted average of all of these coatings for the VOC content and density on the A-101 form? No. Since there is an SCC for water-based paints and an SCC for solvent-based paints, report each SCC separately. All of the various water-based paints should be totaled and entered for the material throughput. For the VOC content and density fields, enter the weighted average of the water-based paints. Follow the same procedure for the solvent-based paints.
Use the design capacity and not the typical operating rate when selecting your SCC. I understand that I should only provide one material description per SCC. If I have a coating line that uses numerous water-based and solvent-based coatings, should I add the gallons of water-based and solvent-based paints together and report the sum for the material throughput and provide the weighted average of all of these coatings for the VOC content and density on the Activity form? No. Since there is an SCC for water-based paints and an SCC for solvent-based paints, report each SCC separately. All of the various water-based paints should be totaled and entered for the material throughput. For the VOC content and density fields, enter the weighted average of the water-based paints. Follow the same procedure for the solvent-based paints.
Related Questions
- I have several pieces of equipment, which are operating at different baud rates. Do I need to set all of my equipment to a common baud rate in order to connect to the APS?
- Many SCCs have a capacity stated in a range. Should I use the equipments design capacity or my operating rate to select the proper SCC?
- What is the temperature operating range of Mecmesin force and torque equipment?
