I´ve had some issues using retracts with Spektrum Smart Safe. What is going on?
Several customers have experienced an issue using retracts with the DX6 and DX7 radios. The Issue-With the transmitter turned on and the retract switch in the down position, when the receiver is switched on the retract servo momentarily drives to the retracted position (wheels up) for 2-5 seconds and then the servo is driven to the down position. The Cause- Smart safe failsafe drives the servos to their preset failsafe positions for several seconds when the receiver is first turned on during the period that the receiver is making connection with the transmitter. (2-5 seconds) If the preset failsafe position for retracts is in the up position, when the receiver is first turned on the retracts will be driven to the up position until the receiver connect with the transmitter. The Solution- Rebind the system with the retracts in the up position thus setting the failsafe position to up (not down).The when the system is first turned on the retract servo will be driven to the down position un
