Is there anything else I should know before operating the Spektrum Module System?
The following points are clearly covered in the manual but need to be followed: • Be sure the transmitter is in PPM modulation mode. If necessary, refer to the instructions included with your radio system for details on how to program your transmitter to PPM modulation. Note: The Spektrum Module System will not operate in PCM modulation mode. • Never power up the module unless the antenna is connected. Doing so can overload the module´s electronics causing damage to the module. • Before operating, the receiver must be bound to the module (see the manual for proper binding instruction). Binding is the process of teaching the receiver the transmitter´s specific GUID (globally unique identifier) code. Binding also sets the fail-safe positions. It´s also recommended that the system be rebound again after radio setup to establish and confirm the desired fail-safe positions. • Before each flying session, it´s imperative that you perform a range check to confirm that the system is working pro
