Is there a warranty on the JackRabbit?
Yes, there is a one-year factory defect warranty on all parts. See warranty statement here. JackRabbit Care and Maintenance To assure quiet, smooth operation, apply a small amount of grease to the wear strips where the metal end of the panels and the wear strips meet. This initial application should be sufficient for a year or more. Regrease the wear strips if the cover begins squeaking during use. It is important to open and close the cover regularly; the spring that operates the cover is self-lubricated and regular use assures that it stays in proper working condition. After installation, if the cover is tight or hard to open and close, the shimming may need to be redone. Over a period of time, if the cover becomes difficult to move in or out (particularly on hot days), check that the side-to-side clearance on the JackRabbit is set at least 1/8 on each side. Drain tubes may become clogged over time and should be removed and cleaned. Periodically remove the top cover and clean out the
