Is there a solution for RISING WATER DAMPNESS (seepage)?
Normally, wherever, the water level is very low, the water is soaked through the Brick walls and through the Bricks, near the foundation area. It rises on the wall and destroys the painting and weakens the plastering etc. Our solution to such Rising damp is as under: • Plastering from the wall is removed totally. • Bricks are dried through a hot air Blower. • After the wall is dried, one coat of Black Coat or TOPCOAT (WS) is applied. • Allow the coating to dry. • Apply two coats of WHITE KNIGHT (you may also use our TOPCOAT RED/Black) at this place. • Allow the coating to dry. • plastering is to be done putting CARBOBOND @ 1% of the cement in the Mix. • Please cure the plastering with water. • Room will be totally damp free.
