Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

IS THE QWIK JON CODE APPROVED?

Approved code Jon qwik
0
Posted

IS THE QWIK JON CODE APPROVED?

0

The system has national code approval as listed by IAPMO. Additionally, numerous individual state code approvals have been obtained. • DOES THE QWIK JON HAVE ANY ODORS? If properly installed per the detailed instructions provided with the system there will be no odors. • THE PUMP COMES ON BUT IT DOES NOT PUMP ANY WASTE UNLESS I ADD MORE WATER. WHAT’S WRONG? The float switch has not been properly adjusted. Move the switch mounting bracket to a higher position on the discharge pipe. A properly mounted switch will bring the pump on at approximately 4″ to 4.5″ and deactivate the pump before 3″. • THE PUMP COMES ON BUT IT WILL NOT SHUT OFF. WHAT’S WRONG? The float switch is out of adjustment (Refer to question #4). • CAN THE QWIK JON TANK BE INSTALLED BELOW GROUND? This is not recommended unless you have a very low ceiling to contend with. The tank can be hidden from view by building a floor over the tank. If the concrete floor has not been laid yet, install a typical in-ground basin, which

What is your question?

*Sadly, we had to bring back ads too. Hopefully more targeted.