Is the Jupiter Ionizer difficult to install?
Not at all. The average installation time is less than 15 minutes. The Jupiter Water Ionizer comes with a diverter that hooks up to the faucet on your sink and a single tube that can easily be cut to length as needed. Attach the hose to the outlet on the diverter and the intake line of the Jupiter Ionizer. The other hose should be connected to the Acid outlet line of the Jupiter Ionizer which drains into the sink. (Remember, Alkaline and Acid water are always produced simultaneously). Plug in the unit, preferably into a GFI (protected) outlet. As water is diverted into the Jupiter Ionizer, it will automatically turn on and begin producing Ionized Water. You will usually see a slightly dark discoloration the first you turn on the Jupiter Ionizer. This is carbon being washed from the filter and is completely normal. Be aware that the Jupiter Ionizer self-cleans each time you turn it on. This can be turned off by pushing the pH button.
Not at all. The average installation time is less than 15 minutes. The Jupiter Water Ionizer comes with a diverter that hooks up to the faucet on your sink and a single tube that can easily be cut to length as needed. Attach the hose to the outlet on the diverter and the intake line of the Jupiter Ionizer. The other hose should be connected to the Acid outlet line of the Jupiter Ionizer which drains into the sink. (Remember, Alkaline and Acid water are always produced simultaneously). Plug in the unit, preferably into a GFI (protected) outlet. As water is diverted into the Jupiter Ionizer, it will automatically turn on and begin producing Ionized Water. You will usually see a slightly dark discoloration the first you turn on the Jupiter Ionizer. This is carbon being washed from the filter and is completely normal. Be aware that the Jupiter Ionizer self-cleans each time you turn it on. This can be turned off by pushing the pH button. You can go to our ionizer intsallation videos page to
Not at all. The average installation time is less than 15 minutes. The Jupiter Water Ionizer comes with a diverter that hooks up to the faucet on your sink and a single tube that can easily be cut to length as needed. Attach the hose to the outlet on the diverter and the intake line of the Jupiter Ionizer. The other hose should be connected to the Acid outlet line of the Jupiter Ionizer which drains into the sink. (Remember, Alkaline and Acid water are always produced simultaneously). Plug in the unit, preferably into a GFI (protected) outlet. As water is diverted into the Jupiter Ionizer, it will automatically turn on and begin producing Ionized Water. You will usually see a slightly dark discoloration the first you turn on the Jupiter Ionizer. This is carbon being washed from the filter and is completely normal. Be aware that the Jupiter Ionizer self-cleans each time you turn it on. This can be turned off by pushing the pH button. We even include a free DVD for you to learn from.
