Is the exhaust vent or outside exhaust hood clogged with lint and restricting air movement?
A clogged exhaust vent system slows moist air from leaving the dryer and extends drying time. Run the dryer for 5-10 minutes. Hold your hand under the outside exhaust hood to check air movement. If the air movement is less than a hair dryer on high speed, clean the lint from the entire length of the system and the exhaust hood. • Replace any plastic or metal foil vent with rigid or flexible heavy metal vent. • Lint should be removed from the entire length of the system every 2 years or more often, depending on dryer use. • Make sure that the outside exhaust hood is free of debris and that the louvers or flapper door easily open and close. Box or louvered hoods are recommended. Is the exhaust vent kinked, smashed or crushed? Kinked or crushed exhaust vent material slows moist air from leaving the dryer and extends drying time. Replace any plastic or metal foil vent with rigid or flexible heavy metal vent. Is the dryer in a new location or is this a new installation? Is there a new exhau
Related Questions
- Does the exhaust from the room air returns as well as the exhaust from the hood need to be HEPA filtered and exhausted 100% outside in negative pressure hazardous drug buffer rooms?
- Is the exhaust vent or outside exhaust hood clogged with lint and restricting air movement?
- Can outside air be utilized instead of building exhaust air?
