Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Is RSSI weaker than -79dBm?

April 26, 2017RSSI weaker

0

Posted

Is RSSI weaker than -79dBm?

1 Answer

0

Posted

d) The Data Rate should be set to one of the two fixed rates, NOT Auto. [DG radio Main Menu -> Radio Configuration Menu, see 5c below] 5. LED indicators? a) Flashing Power LED with no Link LED indicates no Network Name. [Main Menu > Network Configuration Menu] b) DG radio Power LED lit but Link LED not lit after about a minute indicates no Association with the AP radio. See Q2 above. c) DG radio Power LED flashing with Link LED lit indicates an alarm. [Starting Information -> Status Alarmed] DG radio Received Signal Strength Indication RSSI: Stronger than -50dBm needs attenuation or transmit powers reducing to +20dBm minimum; -50 to -70dBm is best for either fixed data rate; -71 to -80dBm is acceptable at the lower fixed data rate [DG Main Menu -> Radio Configuration Menu]; -81 to -89dBm is marginal; -90 to -99dBm is very marginal and will cause an RSSI alarm (flashing Power LED); -100dBm or weaker causes link loss. Transmit power can be set between +20dBm and +30dBm, subject to +36dBm