Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Is my i.LON hardware compatible with the SmartServer 2.0 firmware?

April 26, 2017compatible firmware hardware i.lon smartserver

0

Posted

Is my i.LON hardware compatible with the SmartServer 2.0 firmware?

1 Answer

0

Posted

There are two i.LON 100 hardware platforms. The original platform was used for the original i.LON 100, i.LON 100 e2, and i.LON 100 e3. A new platform was introduced for the i.LON 100 e3 plus that doubled the memory of the original platform, increasing the original 32MB flash/32MB RAM to 64MB flash/64MB RAM. The new platform is used for the i.LON 100 e3 plus, i.LON SmartServer, and i.LON SmartServer 2.0. The new platform is labeled either “i.LON 100 e3 plus” or “i.LON SmartServer” on the front. You can also tell which platform you have through the Web interface. To use the Web interface, open the System Info page. The Hardware Revision value shows which version of the hardware you have. The new 64MB/64MB platform is revision 3. The older i.LONs did not report the hardware revision, but if it is not reported, you have the old one. The other way to tell is to look at the flash disk size in the System Info. The old platform shows about 32MB, the new one about 64MB.