Is it possible to obtain a shiny or varnished finish using Weather Bos ?
Yes. 1. Apply multiple light applications of The Boss on a clean and/or sanded surface, making sure it is dry between applications. Apply multiple applications in direct sun or heat of the day and check between applications to be sure the surface is not sticky or tacky to the touch. Another way to test if the product is properly cured is to place a few drops of water on the surface. If it turns milky or noticeably lightens in color in a ring where the water drop was, this is an indication that the surface is not completely dry. On large surfaces; such as a floor or furniture apply product with a towel or sponge as if you were waxing a car. You can also use an airless sprayer or roller. Using a brush for application is the least desirable. The secret is to get the first 1 or 2 applications to dry completely just below the surface. This creates a barrier for additional light coats to bond to. What you are creating is a monolithic bond from the inside out. This prevents future peeling and
