Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Is a software driver developed for the Mini-ACE™ compatible with the Enhanced Mini-ACE™?

0
Posted

Is a software driver developed for the Mini-ACE™ compatible with the Enhanced Mini-ACE™?

0

A. The Enhanced Mini-ACE™ is software backfit compatible with the Mini-ACE™, with the following two exceptions: (1) In the BU-61588, bit 8 of the RT BIT Word Register (and in the BIT word transmitted to the BC) is CHANNEL B/A*. With the BU-61865, bit 8 is BIT TEST FAIL. It will set to a value of logic “1” if there is a failure of the Enhanced Mini-ACE™’s built-in protocol self-test. (2) With the Mini-ACE™, to run the protocol self-test, it is necessary for the host processor to write and read/verify the test vectors. With the BU-61865 Enhanced Mini-ACE™, all the host processor needs to do is to write a register bit; the self-test vectors are then run autonomously by the BU-61865 Enhanced Mini-ACE™. When the self-test is complete, an interrupt request will be issued to the host (if enabled), and the results of the self-test will be available in registers to be read. In addition, the Enhanced Mini-ACE™ provides a separate additional autonomous self-test for the 4K or 64K internal RAM. Al

Related Questions

What is your question?

*Sadly, we had to bring back ads too. Hopefully more targeted.

Experts123