Infiniti Qx4, Can someone tell me how to program the keyless remote?
The following procedure is for programming keyless entry remote Without The Use Of Nissan Consult. Please read all steps and Note 1 and 2 before proceed. A. 1) Get in the vehicle. Close and lock all doors using the driver’s power door lock-unlock switch. 2) Insert and remove the ignition key more than 6 times within a 10 second period (at a rate of one insertion/removal cycle per second). The key should be withdrawn from the ignition key cylinder completely each time it is removed. 3) Turn the ignition key to the “ACC” position. The ignition key should remain in the “ACC” position throughout the remainder of the programming, including programming of additional remote controllers. 4) Press any button on the remote controller one time. 5) If you are programming only one remote proceed to step C1 below. If programming additional remotes, continue with step B1. B. Programming Additional Remote Controllers (Maximum of 4 Remotes): 1) Remain inside the vehicle after programming the first remo
