Im new to the hobby and am wondering what brands of 1/32 slot cars will work on my standard 1/32 home track?
For the Current Cars: Basically any car from Scalextric, SCX, Ninco, Fly, Artin 1/32, etc. will run on any of the standard 1/32 tracks. Riggen and Parma Home Set cars probably will work as well but they are made a bit wider…the only ones are the “womps” from Parma that use the commercial 16D motors. You will need a higher amp power supply to run these but you can also swap out the motors for some better Plafit or other units to run on your home set supply. The commercial 16D motors take about 1 to 2 amps each so a 10amp 12-13v supply will do for a small home course. For the Older 1/32 Cars: The last issue Marx Mustangs, etc. will run on the track but they are pretty hard to find. Most of the Marx 1/32 cars (99.99%) will not run on the standard 1/32 track since they use their own track and pickup system. I believe Lionel and AC Gilbert was like this as well. Most of the other brands like Revell, Monogram, Bachmann, Strombecker, etc. will run on the standard 1/32 track…
