Im getting error messages when I read from the floppy. Whats wrong?
If you are getting any floppy disk error messages during file save or load, your floppy drive probably needs cleaning. This is done using a 3.5″ cleaning diskette, commonly available at computer or office supply stores. Follow the instructions on the cleaning diskette, then place it in the floppy drive and press DISK, then 7. This will cause the disk’s read/write head to make contact with the cleaning paper inside the cleaning diskette. Repeat this process about 20 times. To guard against future disk errors, clean your floppy drive every 2 or 3 months. If you still get disk errors after the cleaning, your floppy drive may need replacement. This is not unusual considering the age of your MPC60 and the heavy use of the floppy drive. To replace the drive, call your local Akai service center. If after cleaning or replacing your disk drive you still have trouble reading certain old disks, it may be because these disks are old or were saved to from a dirty or worn-out disk drive, causing the
