I want to properly set up my Danelectro Guitar, Bass and Baritone. Do you have any specs or measurements to assist in doing this?
Methods of Measurement: All measurements with guitar in playing position, no exceptions, guitar cannot be laid flat on a table or workbench to make measurements. All strings must be tuned to pitch when measurements are made. Action: Measured from top of 12th fret to bottom of string with 6″ steel rule in 1/64″ increments For Bass and Baritone there are measurements for the low and high strings. The inner strings will graduate in height and follow the fingerboard radius. Truss rod: Capo 1st fret and fret low E string at 15th fret. Measure space between the top of the 7th fret and bottom of string with feeler gauge. Nut height: Measure space between top of first fret and bottom of each string with feeler gauge. Pickup height: measure space from the top of the pickup to the bottom of the low and high E strings using the 6″ steel rule in 1/64″ increments.
