I purchased a kit with a 500cc essence bottle and a 5 Liter pressure sprayer. How do I use them to spray the carpets in my hotel?
Assembly Instructions: Take the sprayer out of the package. Hold the sprayer with the measuring scale facing you. Screw the narrow end of the black rubber tube into the opening above the measuring scale. Tighten it using the black screw nut placed on the tube. Attach the metal tube to the other end of the rubber tube (where the spraying handle is located). Tighten the metal tube to the rubber tube using the screw nut. Insert the small knobs on both sides of the sprayer into the holes on the two ends of the hanging strap. Operating Instructions: Pour the spraying blend into the sprayer (see instructions on the essence bottle). Close the sprayers’ cover and tighten it. Enable the spraying process by creating air pressure inside the sprayer: Lift and lower the sprayer’s opening handle alternately about 7 times. Point the metal tube to the intended area and spray from a distance of about 40 cm by pressing on the spraying handle (until the flow gets too weak). Repeat sections 3 and 4 until
