I own a 1987 FXRS, and am planning on buying a wide tire stock frame from BIGBOAR Question: would your kit work on my o.e.m. motor and trans ?, and how about the BIG BOAR frame?
WideGear will work in your engine/trans if you upgrade the clutch basket to 1991 and upgrade the transmission driver pulley also. Please see the upgrade note on the website. WideGear is designed for use in frames that don’t offset the tranny or engine. If the transmission plate’s offset, it would have to be reset to stock alignment. Road King WideGear starter coupling I need the extended starter splined coupling. is it avalable seperatly? If so at what cost? Do the splines go all the way through? I would need to shorten it to only .375″ longer than stock. Do you have a way to offset the primary .375? I have a Road King running a 180 tire with a 1″ belt at present. To run a stock belt I need to offset motor and trans .375 or the primary .375 I believe I can move the rear belt pully and clutch over with a spacer and special nuts and still have enough engagement to the splines in the shaft. Our starter coupling is 30mm (1.18″) longer than stock, $55 plus shipping. No, there is a 1″ gap in
Related Questions
- I own a 1987 FXRS, and am planning on buying a wide tire stock frame from BIGBOAR Question: would your kit work on my o.e.m. motor and trans ?, and how about the BIG BOAR frame?
- A private equity firm is buying my company. What will happen to my stock options and restricted stock?
- How wide of a rear tire can be used on a stock rear frame?
