I lost or replaced my remote control and just received a replacement. How do I reprogram or resynchronize the new unit?
Bat-Caddy: In order to resynchronize a new remote control you need to have the caddy under power (turned on) with the rheostat speed control in OFF position. Best to reboot (turn off and on) the caddy before starting the process. For pre-2010 models expose the controller box in the battery tray by opening the plastic lid in the tray. Now push the green button on the side of control box while simultaneously pushing either the forward or reverse button on the new remote transmitter for ca. 10 sec. For 2010 models the green button has been eliminated, so just point the remote onto the caddy a few feet away and press forward or reverse for 10 sec. If the caddy does not start moving at once, release and repeat process. Please make sure that the caddy is powered on during this procedure. We recommend to take the wheels off or jack up the caddy during resynchronization to prevent the caddy from getting away.
