I installed the required Driver but the storage controller is not working?
A Silicon Image storage controller driver that is fully installed but not working is usually caused by an incompatibility between the BIOS installed for the controller and the driver. Installing a type of driver that differs from the installed BIOS type will not work. Problems with matching driver and BIOS types sometime occur because the drivers require a later release of BIOS to function correctly. Check the driver download page at Support for the recommended BIOS version to use with the driver. When installing or upgrading drivers and BIOS, be sure to always use the same type of driver and BIOS. Use SATARAID drivers with SATARAID BIOS, SATARAID5 drivers with SATARAID5 BIOS, and Medley RAID drivers with Medley RAID BIOS. Use IDE/nonRAID drivers with IDE/nonRAID BIOS. Mixing BIOS and driver types doesn’t work. You can usually identify the type of BIOS you have from the BIOS boot time messages. IDE BIOS will have a message with “SATALink” during boot. SATARAID and SATARAID5 will have a
