Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

I have tried to activate the Auto Power Shut-Off feature using the remote control as described on page 27 in the owners manual, but nothing happens. Am I doing something wrong?

April 26, 2017activate Auto feature page power shut-off

0

Posted

I have tried to activate the Auto Power Shut-Off feature using the remote control as described on page 27 in the owners manual, but nothing happens. Am I doing something wrong?

1 Answer

0

Posted

For technical reasons, we needed to change the access to this feature. You can still deactivate the Auto Power Shut-Off feature, which automatically powers down the DVD 50 after the unit has been idle for ten minutes, by simultaneously pressing the Forward Skip and Reverse Search buttons on the FRONT PANEL of the DVD 50 and holding them for five seconds. The words “AUTO OFF N” will appear in the front-panel information display. Press the Forward Skip button to toggle between “Y” and “N”. Press any other button on the front panel to return to normal operation. Question:I have turned on the iPod Charging setting in the System Settings menu of the AVR 354. When I power down the AVR to Standby mode, the Power Indicator stays white, although the manual states it should turn amber in Standby mode. Is there a problem with my AVR? Answer:No, your AVR is working properly. The power circuitry must remain on to allow an iPod docked in The Bridge II to charge when the AVR is in Standby mode. The P