I have my new digital to analog set top converter box in the room with the TV. What are the next steps?
Generally speaking, the easy-setup guides which come with the converter boxes are well written and fairly easy to follow for your installation. The following steps are not specific to any brand of box, but for general review: 1. Disconnect your current 75 ohm coaxial antenna lead from the TV. 2. Attach that lead to the converter box’s ANTENNA INPUT jack. 3. Connect one end of the provided short coaxial cable to the converter box’s TO TV, or ANT OUT jack. Plug the other end of this cable into your TV’s antenna terminal. 4. Set the converter box’s output to Channel 3 with the little switch on its back panel, or with its setup menu. 5. Turn on the TV set. Set the TV’s channel to Channel 3. 6. Plug in and Turn ON the digital set top converter box. 7. At this point, if your wiring is proper, you should be seeing a SETUP screen on your TV. If not, rereview your antenna connections and TV channel number until you see the SETUP screen. 8. Follow the setup screen and manual. Usually, there will
