I have Latham (or Imco) Steering and I want to install a Halo. How do I remove the stud?
If you are installing a Halo on a drive with Latham or Imco steering; To remove the top left stud from the drive, use a separate nut (3/8 x 16) as a jam nut. Tighten the two nuts together so that you can place a socket over the jam nut and onto the original nut. Loosen both nuts at the same time. The stud is not Loctited in, and should come out easily. Back to top 12. Will this drive shower void my warranty? We developed our new No Drilling Mounting System as a result of MerCruisers new policy regarding damage to the finish on their new drives voiding their Corrosion Warranty. When asked about drilling holes in the drive to mount a shower, Rick Lang at Mercury Marine replied, “If an aftermarket component causes a failure, or in this case leads to corrosion damage… our warranty will not cover the damage/failure”. Also, for SeaCore product “under no circumstances should the surface of the finish be damaged or it will corrode and there will be no warranty”. Back to top 13. Coolers that
