I have just started ZeroShell and the console displays the commands menu, but how can I connect to the web interface to configure it?
From a PC connected via Ethernet to ETH00 of the ZeroShell box, open the URL https://192.168.0.75 using a web browser. Following the various messages advising you that the X.509 certificate was not issued by a reliable source, you will be required to insert your username and password: the username of the ZeroShell administrator is admin, while the initial password is zeroshell. Keep in mind that ZeroShell, by default, doesn’t enable the dhcp server to provide automatically assignment of IP address belonging to the subnet 192.168.0.0/24. Hence, you must manually configure the PC on which runs the web browser to have an IP address (such as 192.168.0.1) with which you can reach the host 192.168.0.75. • I have an embedded device without a VGA outlet and the keyboard connector and only have a RS232 serial interface. Can I get a text console for ZeroShell? Yes, you can have a serial console. To the RS232 port connect a VT100 text terminal or a PC with a terminal emulator configured to 38400b
Related Questions
- I just upgraded my Dominion SX firmware. Why doesn the console window pop up after logging in through the web interface and clicking on a port?
- I have started NetMarks Manager from my web browser and many of the menu options are disabled. What has happened?
- How do I configure my modem and PC to connect to the BMCU Web Branch & BMCU ONLINE?
