I have a Tdi 90 and it “clunks” when I take up drive. Why?
The most common cause is worn mainshaft spline but other things to check the A frame ball joint and the halfshaft drive flanges, especially if you have a 300 tdi Defender. To check mainshaft spline wear remove the PTO cover and with the main box in first gear rock the car backwards and forwards whilst looking into the end of the input gear. If the spline is worn you will see movement of the shaft in relation to the gear. Replace the gearbox and transfer box input gear (use a cross drilled gear to prevent recurrence of the problem).
