Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

I drive a Freightliner Argosy Cab-over with a CUMMINS SIGNATURE 520 HP AT 2000 RPM WITH A RTLO 20918 B GEARBOX AND METIOR RT 46-160 DIFFS WITH 4.3 RATIO, will your installation kit fit my truck?

April 26, 2017argosy cab-over cummins drive freightliner HP RPM signature

0

Posted

I drive a Freightliner Argosy Cab-over with a CUMMINS SIGNATURE 520 HP AT 2000 RPM WITH A RTLO 20918 B GEARBOX AND METIOR RT 46-160 DIFFS WITH 4.3 RATIO, will your installation kit fit my truck?

1 Answer

0

Posted

Thanks for the inquiry. It is a good thing you asked because the Argosy cabover does require a longer installation cable than most trucks. In addition to the XM6KT you will also need a 6′ (1.8m) Extension Cable, Item XM6EC6. This will extend the Main Cable length to 18′ (5.5m) which will be more than adequate for your vehicle. All items may be ordered from our catalog. Just use this link: http://www.fastertruck.com/catalog.html When you get these two items, XM6KT and XM6EC6, you should have everything you need for a professional installation on your Argosy. It is a good idea to check your existing connectors to insure a good match with our installation kit cables. Just use this link and compare with the connectors to your speed sensor. http://www.fastertruck.com/connectors.html If you have only ONE sensor or one set of sensor leads (2-wires) then you’re good to go with the items mentioned above. If there are two speed sensors or 2 sets of leads (4-wires) then you may need one of these