Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

I can not find the NPC-1 device by using the “Search Network” button in the main application control bar. Where are my TCP/IP interfaces?

April 26, 2017application bar button CONTROL device IP main npc-1 TCP

0

Posted

I can not find the NPC-1 device by using the “Search Network” button in the main application control bar. Where are my TCP/IP interfaces?

1 Answer

0

Posted

Make sure you are using the same subnet mask on your computer and the NPC-1 device. The factory default subnet mask for the NPC-1 is 255.255.255.0. If you are using the NPC-1 with a cross over cable please use a fixed IP address on your PC (e.g. 192.168.0.95). The factroy default IP address of the NPC-1 is 192.169.0.99. If you are not sure about your IP address and subnet mask please select in the help menu the “About…” sub menu. Click the “Network Information” button to read the current IP address and subnet mask of your computer. In bigger networks routers are blocking broadcast messages. Broadcasts are needed to find NPC-1 devices. Please enter manually all IP addresses to activate the NPC-1 devices. Question: I found the NPC-1 interface on the network. My software gives me the following error messages: “Get Server information error ” and “Login error, Please Refer Error Code.” with the error codes -3 and -4. Is my configuration incorrect? Answer: You are probably running a firewa