I am receiving dropped frames during collection. How can I improve the Bluetooth connection between my pliance-x analyzer and my Bluetooth dongle?
To improve the signal transmission between the pliance-x analyzer and the Bluetooth dongle, ensure that there is a clear path (no visible obstructions between the Bluetooth dongle and the pliance analyzer antenna). A USB extension cable (up to 5 meters) can be used in conjunction with the Bluetooth dongle to allow the Bluetooth dongle to be placed on a tri-pod or other pole to position the Bluetooth dongle in an unobstructed view with the pliance analyzer. ___________________________ Q: Only half the sensors are appearing (working) when I try a data collection or calibration. The rest of the sensors show as time outs (TO). A: Check if the pliance connector is inserted into the insole cable connector correctly. The R on the sensor connector must line up on the same side as the R on the sensor cable connector.
Related Questions
- I am concerned that the pliance-x analyzer will go out of range of the Bluetooth dongle attached to the PC. Can anything be done to ensure that I do not miss data during data collection?
- I am receiving dropped frames during collection. How can I improve the Bluetooth connection between my pliance-x analyzer and my Bluetooth dongle?
- I am receiving dropped frames during collection. How can I improve the Bluetooth connection between my pedar analyzer and my Bluetooth dongle?
