I am getting regular beeping from my alarm system – Whats wrong?
The problem could be due to: • Battery depleted (2110 & 160 Series) – check mains and fuse. • Battery not connected correctly (140 Series). • Alarm not fully pushed home on base. • Check that all alarms interconnect – if they don’t, suspect circuit damage. • There is another device in the property. • The battery may be depleted on the Ei160 Series alarms – this is very rare, as the cells are fully charged when they leave the factory, but if the alarm has been fitted to the mounting base for some time prior to installation they can become depleted. If the mains supply is on the cells will recharge very quickly – less than 2 hours • On the Ei140 Series it could be that the battery ’snap’ on the PP3 battery is not fully pushed home • In installations where the alarm has been fitted on an uneven ceiling the mounting plate can be slightly distorted. This can mean that it is difficult to push the alarm fully onto the mounting plate and beeping can result from poor connections. Check that the
