HowTo obtain DSL Stats & Diagnostic Info from the ZyXEL P-660R-ELNK Router?
In order to obtain DSL Stats & Diagnostic Info from the ZyXEL P660R-ELNK it may require setting it up for PPPoE if it is not already configured in that mode and you cannot reach it at it’s web interface IP of 192.168.1.1 ( »192.168.1.1 ). If you can reach the ZyXEL Web Interface right now at it’s IP of 192.168.1.1 then skip down to 3 pages and their thumbnail images for what info to post. If not, then read the steps directly below (depending on your use of Bridge Mode or a secondary Router follow the correct steps). If it is in Bridge Mode the IP 192.168.1.1 will not work (not found/unable to find or similar error) until you have made a few temporary changes to your setup. If you are using a Router behind the ZyXEL P660R-ELNK then you would remove the PPPoE login info from your second Router and then set that Router to DHCP temporarily in order to regain access to the ZyXEL P660R-ELNK at it’s IP of 192.168.1.1 (»192.168.1.1 ). You would then reset the ZyXEL P660R-ELNK modem so it start
