How well would airbrushing a cornhole set work?
As far as paints go you have a very wide selection. The platform is made of wood which will need to be sealed first then scuffed with 400 grit sand paper or a scotchbrite pad. After that you can use E’tac, Createx, AutoAir, Holbein, Golden, etc… . Heat set your artwork/design with a heat gun and then apply a Water-based Polyurethane with a brush, roller or spray gun. As for the corn bags you can use the same paints and just heat set them. Now…the equipment you’ll need: 1) For this type of work I’d highly recommend the Iwata eclipse BCS. It’s fantastic for working on medium sized projects, has great atomization, and since it’s siphon fed color changes are quick. It’s also one of the most preferred airbrushes for t-shirt artists. 2) A 10′ braided air hose. 3) An air compressor with a water trap and storage tank. I also recommend buying a second water trap/air filter along with another section of braided hose to eliminate the water in the airlines. You can contact me later about setti
