How to use the Sauna Belt for Best Results ?
The Sauna Belt is essentially similar to a heating pad. However, the temperature is controlled from 35-70 degrees Celsius. We recommend you to set the maximum temperature for the first five minutes, then set it to your desired temperature. • Strap the Sauna Belt around the chosen body part (abdomen, waist, or hips) using Velcro sections. The Sauna Belt should completely surround your body without getting creased, doubles over or folded. Do not strap the Sauna Belt on too tightly to achieve the sauna effect. • Check to see if your supplied mains voltage is the same as that printed on the plug before plugging the Sauna Belt in. • Make sure the temperature regular is switched OFF. • Plug the Sauna Belt into the main power outlet. Turn the dial on the temperature regular to the maximum position so the device heats up quickly. WARNING: After five minutes, adjust the heat controller to your desired temperature. • At the end of the session, towel off the sweat and wait 15 to 20 minutes before
