Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How to use different sets of drives in S2VR?

April 26, 2017different drives s2vr

0

Posted

How to use different sets of drives in S2VR?

1 Answer

0

Posted

1. Eject the drive from desktop. Open the “S2VR Manager” software. 2. Write down current RAID settings – Performance, Protected, JBOD and Turbo number for future reference. 3. Unplug existing drives one by one until you unpopulated/pull out all drive modules. 4. Wait for few seconds until S2VR Manager shows that all drives “unplugged.”. 5. Click on “Change Project” button. 6. Wait few seconds; the S2VR Manager will automatically open a drawer where you can configure new RAID. At this moment, all selections and buttons are disabled and gray out. 7. Plug in the new set of drives. Wait few seconds until you see “Create New RAID” available. 8. Choose the RIGHT RAID settings for the new drives – Performance, Protected JBOD and Turbo number. 9. Click on “Create New RAID” button. New drive should automatically show up on your desktop or OS. If not, please restart your OS. After “change project”, DO NOT format or partition this drive unless you want to delete all the data.