How to make swim ladder to get into inflatable boat from the water?
You will need 8-9 inch long pieces of 2″ diameter white plumbing PVC pipe and a piece of thick rope. Drill holes at the end of each pipe and run the rope from one hole to another. Make 2 knots where the rope exits the holes in the pipe, to make sure that the pipe will stay in place and will not slide when boarding the boat. Make knots along the rope to assist with pulling yourself out of the water. Attach rope to the grab line, or any other place that can support heavy weight and throw the other end of the rope across the boat into the water, so that it is 20″ below water line. When boarding, insert one foot inside the loop with the pipe and grab the rope with both hands. Pull your body inside the boat, by using knots on the rope to help you up.
