How to Make Friendship Bracelets Using Hemp?
To make friendship bracelets using hemp, you will need about six or seven yards of hemp twine along with a masking tape. Now, here are the instructions on how to make friendship bracelets using hemps. Firstly, you will have to cut the hemp strand which is about six times the length of the bracelet. The second strand of the hemp should be about two times long as the first and then you should fold the strands in the middle in such a way that there is a crease at the midpoint. Then tie the midpoints with a knot and do not forget to leave a loop at the end, which will be fastened by a pin to a carpet. Make sure that the short strands are in the middle and long strands are out. Now, use the right strand and make a forty five degree angle with the middle strands and then place it over the two middle strands you have. Guide the left strand under the middle one and pull both the left and the right to secure them. Repeat the above step till you get a sufficient length of the bracelet. How to Ma
