How to Make a Marshmallow Shooter
The basic requirements for making a marshmallow gun are 2 PVC elbows, 1/2 inch PVC pipe, 2 PVC T’s, 2 PVC end caps, spray paint, and marshmallows (ammo). Then these pipes are to be cut according to the length of the barrel that you that you require. The barrel needs to be cut into four pieces about a third of the barrel size. These would be used to make the handles and also for setting up the connection between the PVC pipes. Now comes the two tees, the caps and the elbows. The smallest part needs to be put in between the tees and the two PVC pipe parts on the top and the bottom end of the tee. A cap is put on the top and the bottom and also the elbow needs to be placed. Now you have the barrel put into the tee that is the PVC pipe with the cap at the end of it. Now the PVC that is half the size f the barrel needs to be put on the elbow. The last of the PVC pipes is to be placed on the tee and the last of the set of caps on the PVC pipe that had been cut to one third of the size of the
