How to install my One2TalkTM Chatbox?
With your One2TalkTM Chatbox now activated, all you have to do is follow a few simple steps. Step 1. The unit has three (3) ports labeled ‘INTERNET’, ‘HANDSET’ and ‘PHONE LINE’. • Use the grey phone cable to connect one end to your telephone and the other end to the ‘HANDSET’ port. • Use the yellow Ethernet cable to connect one end from an Ethernet port on your ADSL router/switch to other end of the One2TalkTM Chatbox ‘INTERNET’ port. • Connect your home line telephone cable from the wall to the ‘PHONE LINE’ port (this is optional but recommended). • Make sure the DHCP (Dynamic Host Configuration Protocol), UDP Port =5060 and UDP 10000 to 40000 are enabled in your router and firewall. Step 2. Connect the black power adapter to the ‘POWER’ port on the One2TalkTM Chatbox adapter. • The ‘POWER’ LED will illuminate once power is running. • The ‘INTERNET’ LED will illuminate if the yellow Ethernet cable is connected properly to the INTERNET port. • If the ‘VoIP RDY’ LED is on, you’re One2Ta
