How to install and configure the central site with the base unit and omni-directional antenna?
When the place has been found for the omni-directional antenna and for the base unit, the antenna should be mounted and cable connected to the antenna and to the base unit. Connectors outside the rooms should be protected using weatherproof rubber material tape to avoid moisture coming into the connectors. Ordinary electrical tape should be put over the rubber protecting tape. Electrical tape alone does not protect the cable connections hermetically enough. Within a few months moisture will be inside the cable connections, and the quality of your system will be degraded. What concerns the minimum required configuration of the base unit, you should choose the frequency your system will be operated at, the basic data rate, and the system identifier. Only clients having the same radio settings will be able to work with your base unit.
